Products

• Patented cartridge stabilizing plate for extra cartridge support
• Easily converts to mix ratios of 1:1 and 2:1
• Heat treated drive rod and friction plates
• Easy release star-burst reverse gripping plate and zinc alloy handle

The ZIG ZAG 9 Segment Cup Wheel has very aggressive segment shapes for grinding and design for removing adhesives, thinset coatings and leveling uneven spots or joints. Also used for coatings, adhesive, thinset, and grout bed removal.

The DDM S18 is the ultimate mixing station for self-leveling materials, grouts and epoxies, producing a perfect mix every time. Portable station provides effective hands-free mixing, enabling fast precision pouring of materials.

Mix, Transport and Pour directly onto the floor

• Our portable station provides efficient hands-free mixing, enabling fast precision pouring of materials.

• Mixes up to 260 lbs. (26-gal bucket) hands-free in only minutes

• Removable dust splash with lid-mounted vacuum attachment and bucket

• Lightweight with “EASY TILT” for control and balance

• Pour spout for precision placement of material

• Ergonomic handle for precision pouring

• Heavy-duty caster (including two that lock) for portability and movement while pouring

• The Mixing Station comes with the variable speed mixer

• Heavy duty high torque 1800w, 16amp, 2-Geared Motor

• Variable speed adjustment with lock-on feature

• Soft-start and constant speed control

• Two gears,

(LOW 1st) 1. 150-300r/min,

2. 300-650r/min

(HIGH 2nd) 1. 0-650r/min,

2. 0-1050r/min.

• DDM18-01 mixing paddle (6-1/2 diameter)

Dynamic Diamond Tooling’s DDG 850R, Radio Controlled / Rider Floor Grinder.

• 3 Head Planetary Grinding System
• Techwell Handheld Radio Controller
• Capable of Walk or Ride

The DDG 750 Propane powered floor grinder from Dynamic Diamond Tooling has a three planetary grinding system that’s offers a total grinding width of 26.4″ with a powerful 24HP Kohler PCV740 Propane motor.

Dynamic Diamond Tooling introduces the all new DDG 570 floor grinder.

DDG 570 Floor Grinder

• Variable Speed
• 3 Head Planetary
• Single Phase 230V
• Powerful 7.5HP Motor
• LED Floor Lighting System
• Water Tank

LV Repair A & B, 2 gallon kit is fast acting solution that repairs cracks, spall and divot Repair for concrete floors. Solution cures in 30 minutes. 400-500 Square Foot.

Spall Grout 3 A & B, 2 gallon kit is a solution for repairing Spall and Grout in concrete floors. Solution cures in 45 minutes. 800-900 Square Foot.

The SAW BLADE Quick Change Diamond was designed with the same intention and purpose as the SABER TOOTH diamond but allows debris to build up between the diamond segments creating a larger surface area to provide for a longer tool life while maintaining the diamonds’ performance. The SAW BLADE design will leave a smoother finish than the SABER TOOTH design.

Dynamic Diamond Tooling announces the Saber Tooth XHF, the newest metal bond diamond to the Saw Blade Diamond Series. The Saber Tooth XHF metal bond diamond is available in 30/40 or 80/100.
The SABER TOOTH XHF diamond has a tremendous rate of removal on extreme hard floors. It is very aggressive.

The DYNO-XT5-L is an extremely aggressive PCD consisting of superior, high quality five industrial grade polycrystalline segments and a single 30 grit metal bond diamond. The total weight of the machine is transferred to the tips of the polycrystalline teeth. Without any support to hold the teeth back, the PCD aggressively grinds deep into the coatings and concrete surface with amazing speed. This configuration will quickly remove any topical substance and continue into the concrete to quickly expose large size aggregate. Note: This diamond will leave severe scratch patterns.

Easy Cut is an effective concrete agent for extra hard concrete that has been treated with concrete curing sealers and hardening agents. Can also be used to strip coatings, waxes or other heavy baked on grime.

Directions: For extra hard concrete or concrete that has been treated with concrete curing sealers or hardening agents, use 1 Part Easy Cut to 1 Part water (1:1).

For strip coatings, waxes or heavy baked on grime or general cleaning, use 1 Part Easy Cut and up to 50 Parts water (Up to 1:50).

Dynamic Diamond Tooling’s single phase DDV 13 HEPA dust collector is equipped with a conical pre-filter and one H13 HEPA filter.

The main filter with 1.5 m² filter surface, each of the HEPA filter is independently tested and certified.

DDV 13 can separate the fine dust with efficiency 99.97% @ 0.3μm, ensuring your work space is a clean and safe environment.

DDV 16 is recommended for small grinders and hand held power tools.

LV Repair is a low viscosity 22 oz. cartridge kit for fast acting repairs on cracks, spall and divot Repair for concrete floors. Solution cures in 30 minutes.

Dynamic Diamond Tooling’s single phase DDV 26 HEPA dust collector is a powerful, portable vacuum that can be used alone for wide variety of pick-up applications, and to supplement hand/floor power tools for dustless grinding, sanding and drilling. Excellent for both wood and concrete dust and other construction, restoration materials where fast, dustless recovery is required to maintain productivity and clean-air working environment.

All units include individually tested and certified HEPA filters and DDV 26’s unique direct “dustless” deposit into poly bags for safe, easy handling and disposal. Equipped with “Jet Pulse” filter cleaning system for maximizing airflow and pick-up efficiency.

Vacuum is H-Class and ETL Certified recognized by OSHA.

Poly Joint 85 is a two part self leveling semi-rigid polyureajoint filler kit, that’s fast setting and used for filling control and construction joints in industrial concrete floors. Tough performance reduces floor joint repairs and maintenance. 22 oz. Cartridge. Rapid gel time, quick cure and 100% Solids. No VOC’s.

The newly introduced DYNO-E3-L is an extremely aggressive PCD consisting of superior, now with 3 high quality industrial grade polycrystalline segments. The total weight of the machine is transferred to the tips of the polycrystalline teeth. Without any support to hold the teeth back, the PCD aggressively grinds deep into the coatings and concrete surface with amazing speed. This configuration will quickly remove any topical substance and continue into the concrete to quickly expose large size aggregate. Note: This diamond will leave severe scratch patterns.

Dynamic Diamond Tooling (DDT) DC-5011 Polyurea is available in 750 x 750 ml dual cartridge. The cartridges provide the contractor with the flexibility to accomplish a multitude of jobs, without the need to purchase small tubes, which are painfully dispensed manually using a caulking gun or the need to hire a joint filling contractor that utilizes an expensive, plural component static mix equipment.

The standard color is medium grey but any custom color can be chosen for an additional small fee.

The Pneumatic gun has a speed dispensing control and is available for purchase from DDT. In addition, you will find Dynamic Diamond Tooling’s’ heavy duty 8”angled scraper from the Cucamonga company to be a tremendous asset when shaving the joint.

Click on the thumbnail image (right) to view the Polyurea Coverage Chart. For questions or more information, please call Dynamic Diamond Tooling at 407-298-7050.

The VSF metal bond diamond consists of two round 24(D) x 12(H)mm diamond segments and is designed for very soft concrete floors utilizing a very hard bond.